Wallpaper Calculator: How Many Rolls Do You Need?

This wallpaper calculator turns your wall sizes into the number of rolls you need, with trim, pattern repeat and extra for mistakes built in. Enter the room size, pick the roll and the pattern match, and the result updates as you type.

Wallpaper Calculator

Walls to cover
Wallpaper roll
Advanced settings

A drop is one vertical strip. Each door removes 3 ft (0.9 m) of width and each window removes 1.5 ft (0.45 m), because strips above and below windows still need paper.

Wallpaper to buy - Enter your wall sizes

    Estimates only. Check the roll size and pattern repeat on the label, and buy every roll from one batch.

    Wallpaper is the one finish where a small counting error costs a whole roll. Order short, and the last strip comes from a new batch with a slightly different shade. Order long, and a roll worth $60 or £30 stays sealed in the cupboard. A wallpaper calculator removes the guesswork by counting strips instead of guessing from floor area.

    The tool above takes the wall sizes, the roll size and the pattern match, then returns the rolls to buy. The guide below explains every number. Each US example uses a 12 by 15 foot room with 8 foot walls, and each metric example uses a 4 by 5 metre room with 2.4 metre walls.

    What Is a Wallpaper Calculator and How Does It Work?

    A wallpaper calculator estimates the rolls a room needs by counting the vertical strips (drops) that cover the wall width, then working out how many drops one roll yields. If the pattern has a repeat, each drop gets longer, so a roll yields fewer drops.

    Many guides divide wall area by the area of one roll. That shortcut understates the order, because every roll leaves an offcut at the bottom. Take the 12 by 15 foot room, which has 384 square feet (sq ft), or 35.7 square metres (m²), of wall after doors and windows. A US double roll covers about 56 sq ft, so the area method says 7 rolls. The drop method says 11, and 11 is the number that actually covers the walls.

    How Do You Use This Wallpaper Calculator?

    Choose whole room or one wall, enter the wall height and size, pick the roll and the pattern match, and the wallpaper calculator shows the rolls to buy. If you measure in metres, switch the toggle and the fields convert for you.

    1. Pick feet and inches or metres and centimetres at the top of the tool.
    2. Choose a whole room or a single accent wall.
    3. Type the wall height, then the room length and width.
    4. Enter the number of doors and windows.
    5. Select the roll size from the label on the wallpaper.
    6. Pick the pattern match and type the repeat if the pattern has one.

    The result panel lists the wall area, the drops needed, the drops per roll, the spare drops and the rolls. Add a price per roll to see the cost. If the wallpaper has a bold pattern, choose a colour for the paint on the remaining walls with the paint calculator before you order.

    How Do You Measure Walls for Wallpaper?

    Measure the wall height from the floor to the ceiling, then measure the width of every wall you plan to cover and add the widths together. If the room has a picture rail or a dado rail, measure only the part that gets paper.

    The 12 by 15 foot room has two 12 foot walls and two 15 foot walls, which add up to 54 feet (16.5 m) of wall. At 8 feet (2.4 m) high, that is 432 sq ft (40.1 m²) before doors and windows.

    Use a steel tape measure, because cloth tapes stretch. Measure the height at both ends of each wall, since floors and ceilings slope in older houses, and enter the larger number. Write each figure to the nearest inch (2.5 cm).

    What Is the Formula for How Many Rolls of Wallpaper You Need?

    Rolls equal the drops needed, plus 5% for mistakes, divided by the drops one roll yields, rounded up. Drops equal the wall width divided by the roll width, rounded up. Drops per roll equal the roll length divided by the drop length, rounded down.

    Work the US room by hand. The walls measure 54 feet, and one door and two windows remove 3 feet, 1.5 feet and 1.5 feet, which leaves 48 feet of paper width. A double roll is 20.5 inches (52 cm) wide, so 48 feet divided by 1.71 feet gives 28.1, rounded up to 29 drops.

    Each drop is the 8 foot wall plus 4 inches of trim, which is 8.33 feet (2.54 m). A 33 foot (10.1 m) double roll divided by 8.33 feet gives 3.96, so each roll yields 3 drops. Adding 5% turns 29 drops into 31, and 31 divided by 3 gives 10.3, rounded up to 11 double rolls.

    The metric room works the same way. A 53 cm by 10.05 m roll, 16.63 m of paper width and 2.5 m drops give 32 drops. Adding 5% gives 34 drops, and with 4 drops per roll the order is 9 rolls.

    What Size Is a Roll of Wallpaper?

    A US single roll is 20.5 inches wide and 16.5 feet long, a US double roll is 33 feet long, and a UK standard roll is 53 cm wide and 10.05 m long. If the label shows a different size, choose the custom option and type the width and length.

    A US single roll covers about 28 sq ft, and a US double roll covers about 56 sq ft. A UK roll covers 5.3 m² (57 sq ft). Retailers in the US usually sell by the single roll but pack and ship double rolls, so check which unit the price refers to.

    Roll length matters more than roll area. On an 8 foot wall, a 16.5 foot single roll yields only 1 drop, because two drops need 16.7 feet. The same room needs 31 single rolls but 11 double rolls. Ordering single rolls for tall walls wastes almost half the paper.

    Peel-and-stick rolls and wide commercial rolls come in many sizes. Read the width and length on the packaging and use the custom option.

    How Does Pattern Repeat Change How Much Wallpaper You Need?

    A pattern repeat adds the repeat length, or half of it for a half drop, to every drop, so a roll yields fewer drops and the order rises. Plain papers, textures and random matches carry no repeat allowance.

    The repeat is the vertical distance before the pattern starts again, printed on the label. A straight match lines up across the wall at the same height. A half drop match shifts each neighbouring strip down by half the repeat. A random match needs no alignment.

    The table shows the 12 by 15 foot room with 5% extra and an 8 foot wall.

    Pattern and rollRepeatDrop lengthDrops per rollRolls to buy
    No pattern, double rollNone8.33 ft (2.54 m)311
    Straight match, double roll24 in (61 cm)10 ft (3.05 m)311
    Straight match, double roll30 in (76 cm)10 ft (3.05 m)311
    Half drop match, double roll30 in (76 cm)11.25 ft (3.43 m)216
    No pattern, single rollNone8.33 ft (2.54 m)131

    Small repeats cost nothing here, because 3 drops still fit on a double roll. A 30 inch half drop pushes each drop to 11.25 feet, so only 2 drops fit and the order jumps from 11 to 16 rolls. In a UK room, a 64 cm straight repeat on a 2.5 m drop also moves each roll from 4 drops to 3, which lifts the order from 9 to 12 rolls.

    Always check the repeat before falling for a pattern. A large repeat on a tall wall can add 5 rolls to the bill.

    How Do You Deduct Doors and Windows From a Wallpaper Estimate?

    Subtract the full width of each door and about half the width of each window, because paper still runs above and below a window. The tool removes 3 feet (0.9 m) per door and 1.5 feet (0.45 m) per window.

    Take the 54 foot US room. One door removes 3 feet, and two windows remove 3 feet more, which leaves 48 feet of paper width. Skipping the deduction would add 3 drops and about 1 roll.

    If a window is wider than 4 feet (1.2 m), or a patio door fills most of a wall, count it as a door so the tool deducts the full width. Fireplaces and built-in cabinets follow the same rule, because paper stops at their edges.

    How Much Wallpaper Do You Need for an Accent Wall or Sloped Ceiling?

    For an accent wall, switch the tool to one wall, enter the wall width and height, and read the rolls. A 10 foot (3 m) wide, 8 foot high accent wall needs 7 drops, which is 3 US double rolls.

    The count comes from 10 feet divided by 1.71 feet, rounded up to 6 drops, plus 5% extra, rounded up to 7. With 3 drops per roll, 7 drops need 3 rolls. In a UK room, a 3 m wall with a 2.4 m height needs 7 drops and 2 rolls of 4 drops each.

    On a sloped ceiling or a gable wall, enter the tallest point of the wall. Every drop starts at the ceiling line and runs to the floor, and the longest strip sets the roll length. Cut shorter strips from the offcuts and keep them for the second roll.

    How Much Extra Wallpaper Should You Buy?

    Add 5% for mistakes and trimming, and buy one spare roll for patterned paper or a room with many corners. The tool applies the 5% to the drop count, and you can change the percentage in the advanced settings.

    Order every roll in one purchase. The batch number printed on each label identifies the print run, and rolls from different runs can differ in shade. A mismatch shows most on plain and metallic papers under side light.

    Keep the leftover roll after hanging. A spare strip lets you patch a scuff or a water mark later, and the retailer may discontinue the pattern within a year.

    How Do You Estimate Wallpaper Cost?

    Multiply the number of rolls by the price per roll, and add paste and tools separately. If the retailer sells by the double roll, enter the double roll price.

    In the US example, 11 double rolls at $60 each total $660. In the metric example, 9 rolls at £30 each total £270. Both prices are illustrations, so type the price from your own product page.

    Compare roll size before you compare price. A single roll at $30 yields 1 drop in an 8 foot room, and a double roll at $60 yields 3. The double roll costs 33% less per drop.

    Which Mistakes Make a Wallpaper Estimate Wrong?

    The most common mistake is dividing wall area by roll area, which ignores the offcut left at the bottom of every roll. The 12 by 15 foot room shows the gap: the area method gives 7 rolls and the drop method gives 11.

    • Ignoring the pattern repeat on the label.
    • Ordering single rolls when double rolls yield more drops.
    • Forgetting the 4 inch (10 cm) trim at the top and bottom of each drop.
    • Skipping the extra for mistakes.
    • Buying rolls from different batches.
    • Measuring the height at one end of a wall only.

    Plan the floor and the wall together. The flooring calculator sizes the boxes for the floor, and the bedroom colour combination guide shows which colours sit well beside a patterned wall.

    Further reading: the Wallcoverings Association is the North American trade body for wallcovering makers, and it helps develop industry standards for the product.

    FAQs

    A 12 by 15 foot room with 8 foot walls, one door and two windows needs about 11 US double rolls. A strong half drop pattern can raise that to 16.

    Divide the paper width by the roll width and round up for drops. Divide the roll length by the drop length and round down. Divide drops by drops per roll, then round up.

    Buy 5% extra for mistakes, plus one spare roll for patterned paper. Every roll should come from one batch, so order everything at once.

    A US single roll is 20.5 inches by 16.5 feet, and a double roll is 33 feet. A UK standard roll is 53 cm by 10.05 m.

    The pattern repeat is the vertical distance before the design starts again. It is printed on the label and adds to the drop length, so patterned paper needs more rolls than plain paper.

    Yes. Subtract the full width of each door and about half the width of each window, because paper still covers the wall above and below a window.

    Yes, for most rooms. A double roll yields 3 drops on an 8 foot wall, while a single roll yields 1, so double rolls waste far less paper.

    A 10 foot wide, 8 foot high accent wall needs 3 US double rolls. A 3 m wide, 2.4 m high wall needs 2 UK rolls.

    Scroll to Top