Tile Calculator: How Many Tiles Do You Need?

This tile calculator turns your floor or wall size into the number of tiles, boxes, adhesive bags and grout you need. Enter the area, pick the tile size, and the result updates as you type.

Tile Calculator

Area to tile
Tile size
Boxes and extras
Advanced settings

Check the coverage printed on your adhesive and grout bags. Large trowel notches and rough floors use more adhesive.

Tiles to order - Enter your area and tile size

    Estimates only. Buy every box from one batch, and keep 5% to 10% spare tiles for future repairs.

    Ordering tile by guesswork ends in one of two ways: a last row with gaps, or three unopened boxes nobody wants. A tile calculator removes both outcomes by turning measurements into an exact count.

    The tool above takes the floor or wall size, the tile size, the grout joint and the layout pattern, then returns the tiles, boxes, adhesive and grout to buy. The guide below explains the math behind each result. Every example uses a 10 by 10 foot (3 by 3 metre) floor unless stated otherwise.

    What Is a Tile Calculator and How Does It Work?

    A tile calculator estimates how many tiles cover an area by dividing that area by the size of one tile plus its grout joint, then adding extra tiles for cuts and breakage. If the room has fixed features such as a bathtub or a kitchen island, the calculator subtracts that area first, because tile never goes there.

    The tool runs four steps. It multiplies length by width, subtracts the area you enter, divides by the tile with its joint, and adds the extra percentage for your layout. Take a 10 by 10 foot floor with 12 by 12 inch tiles and 1/8 inch (3 mm) joints. Each tile and joint covers 1.02 square feet (sq ft), so the floor needs 98 tiles. A 10% allowance raises the order to 108 tiles.

    How Do You Use This Tile Calculator?

    Enter the length and width of the area, choose a tile size, and the tile calculator shows the tiles to order in the result panel. If you work in metres, switch the toggle to metres and millimetres, and the fields convert for you.

    1. Pick feet and inches or metres and millimetres at the top of the tool.
    2. Type the length and width of the floor or wall.
    3. Enter any area to subtract, such as a bathtub or a hearth.
    4. Choose a common tile size or type your own length and width.
    5. Set the grout joint and the layout pattern.
    6. Add the tiles per box and the price per tile to see boxes and cost.

    The result panel lists the area, the tiles before extras, the adhesive bags and the grout. A 3 by 3 metre floor with 300 by 300 mm tiles and 3 mm joints, for example, returns 109 tiles, 2 bags of 20 kg adhesive and 1 bag of 5 kg grout.

    Choose the wall colour after the tile, because floor tile sets the undertone of the room. The room colour combination guide and the bedroom colour combination guide list pairings that suit common tile shades.

    How Do You Measure a Floor or Wall for Tile?

    Measure the length and width at the widest points with a tape measure, then multiply the two numbers to get the area in square feet or square metres (m²). If the room isn’t a plain rectangle, split it into rectangles and add the areas together.

    An L-shaped room made of a 12 by 10 foot main space and a 4 by 6 foot alcove measures 120 plus 24, which gives 144 sq ft (13.4 m²). Walls follow the same rule: width times height for each wall, then the walls added together.

    Subtract only the areas where tile won’t go. A 30 by 60 inch (76 by 152 cm) bathtub covers 12.5 sq ft (1.16 m²) and comes off the floor total, while a vanity that sits on top of the tile stays in. Write each measurement down to the nearest inch (2.5 cm) before typing it into the tool.

    What Is the Formula for How Many Tiles You Need?

    Tiles needed equal the area divided by the area of one tile with its joint, multiplied by 1 plus the extra percentage, and rounded up to a whole tile. The tool applies the same formula in both unit systems.

    Work the 10 by 10 foot floor by hand. A 12 by 12 inch tile with a 1/8 inch joint measures 12.125 by 12.125 inches, which is 147 square inches, or 1.02 sq ft after dividing by 144. Then 100 sq ft divided by 1.02 gives 97.9, which rounds up to 98 tiles. Multiply by 1.10 and round up again for a final order of 108 tiles.

    Metric tile sizes use millimetres, so divide the tile area in square millimetres by 1,000,000 to get m². A 300 by 300 mm tile with a 3 mm joint covers 0.0918 m², and a 9 m² floor needs 99 tiles before extras.

    Do Grout Joints Change the Tile Count?

    Yes, grout joints reduce the tile count, and the effect grows as tiles get smaller. If a floor uses 4 by 4 inch tiles, a 1/8 inch joint cuts the count by about 6%, from 900 tiles without joints to 847 tiles with them on a 100 sq ft floor.

    Large tiles change little with the joint. A 12 by 12 inch tile drops from 100 to 98 tiles over the same area. Joint width depends on the tile type: 2 to 3 mm (about 1/8 inch) for rectified porcelain, which has edges cut square after firing, 5 mm (3/16 inch) for standard ceramic, and 8 to 10 mm (3/8 inch) for handmade or rustic tile.

    Enter the joint width from the tile spec sheet, not from habit. A 5 mm joint on 4 by 4 inch tiles removes roughly 9% of the tiles compared with a floor without joints, so a wrong entry shifts the order by dozens of tiles.

    How Much Extra Tile Should You Order?

    Order 10% extra for a straight grid, 12% for a brick offset, and 15% for a diagonal or herringbone layout. If the tile is large and the room is small, add 15% or more, because each cut wastes a bigger piece.

    Apply those figures to the 98 tiles the 10 by 10 foot floor needs. A straight grid orders 108 tiles, a brick offset orders 110, and a diagonal or herringbone pattern orders 113. A 5 by 8 foot (1.5 by 2.4 metre) bathroom floor with 24 by 24 inch tiles needs 10 tiles before extras and 12 tiles at 15%.

    Keep 5% to 10% of the order unopened after the job. Manufacturers discontinue tile lines, so spare tiles from the original batch are the only reliable way to replace a cracked tile years later.

    How Many Tiles Fit in 100 Square Feet?

    A 12 by 12 inch tile needs 98 tiles per 100 sq ft (9.3 m²) before extras, and smaller tiles need many more. The table lists the order quantity and grout for the most common sizes.

    Tile sizeTiles per sq ft (per m²)Tiles for 100 sq ft, with 10% extraGrout for 100 sq ft
    3 x 6 in subway (76 x 152 mm)7.52 (80.9)82921.5 lb (9.8 kg)
    4 x 4 in (102 x 102 mm)8.46 (91.1)93221.5 lb (9.8 kg)
    6 x 6 in (152 x 152 mm)3.84 (41.3)42314.4 lb (6.5 kg)
    8 x 8 in (203 x 203 mm)2.18 (23.5)24110.8 lb (4.9 kg)
    12 x 12 in (305 x 305 mm)0.98 (10.5)1087.2 lb (3.3 kg)
    12 x 24 in (305 x 610 mm)0.49 (5.3)555.4 lb (2.4 kg)
    24 x 24 in (610 x 610 mm)0.25 (2.7)283.6 lb (1.6 kg)

    The table assumes a 1/8 inch joint, a 3/8 inch thick tile and 10% extra. For a room measured in metres, divide the area in m² by 9.29 and multiply each table figure by that result. A 4.6 m² bathroom floor, for instance, is half of 100 sq ft, so it needs about half of each number.

    Grout demand follows joint length, not floor area. A 4 by 4 inch tile has three times the joint length of a 12 by 12 inch tile per square foot, which is why 100 sq ft takes 21.5 lb (9.8 kg) of grout instead of 7.2 lb (3.3 kg).

    How Many Boxes of Tile Do You Buy?

    Divide the tiles you need by the tiles in one box, then round up to a whole box. If the box lists coverage instead of a tile count, divide the area by the coverage per box.

    The 108-tile order with 10 tiles per box comes to 10.8, so the purchase is 11 boxes, or 110 tiles. A box that covers 10 sq ft (0.93 m²) gives the same answer: 110 sq ft with extras divided by 10 sq ft is 11 boxes.

    Buy every box in one order. Tiles from different production batches (called dye lots in the US) can differ slightly in shade, and the batch number is printed on each box. During installation, pull tiles from three or four boxes at a time so any shade shift spreads across the floor.

    How Much Adhesive and Grout Do You Need?

    A 50 lb (22.7 kg) bag of thinset, the cement-based tile adhesive, covers about 80 sq ft (7.4 m²) with a 1/4 by 3/8 inch notched trowel, so a 100 sq ft floor needs 2 bags. In the UK, a 20 kg bag usually covers 4 to 5 m² at a 6 mm bed.

    Larger tiles need a deeper trowel notch and more adhesive per square foot, so check the coverage printed on the bag and type it into the advanced settings. The Tile Council of North America (TCNA) publishes the TCNA Handbook, which lists the installation method for each type of surface.

    Grout depends on joint width, joint depth and tile size. A 100 sq ft floor of 12 by 12 inch tiles with 1/8 inch joints needs about 7.2 lb (3.3 kg), which fits in one 10 lb bag. The tool multiplies the joint volume by the weight of grout and adds 10% for waste. Sanded grout suits joints wider than 1/8 inch (3 mm), and unsanded grout suits narrower ones.

    How Much Tile Do You Need for Walls, Showers and Backsplashes?

    Multiply each wall’s width by its height, add the walls together, subtract openings and niches, then enter the total into the tile calculator. If the wall is a single rectangle, type the wall width as the length and the wall height as the width.

    Take a shower with three tiled walls that are 5, 3 and 5 feet wide and 7 feet tall. The walls total 91 sq ft, and a 1.5 sq ft niche leaves 89.5 sq ft (8.3 m²). With 3 by 6 inch subway tile, a 1/8 inch joint and 10% extra, the order is 742 tiles.

    A kitchen backsplash runs about 18 inches (46 cm) from the counter to the wall cabinets. A 10 foot (3 metre) counter run is 15 sq ft (1.4 m²) and needs 125 subway tiles. Pick the tile after the cabinet finish, and the kitchen cabinet ideas guide shows which colours pair well with white and patterned tile.

    Which Mistakes Make a Tile Estimate Wrong?

    The most common mistake is ordering the exact tile count with no extra for cuts. A 100 sq ft floor needs 108 tiles, not 98, and the last row of any room needs cut pieces.

    • Skipping the extra percentage for the layout pattern.
    • Ignoring the grout joint on small tiles, which overorders by dozens of tiles.
    • Mixing units, such as typing a 12 inch tile while the tool is set to millimetres, which inflates the count hundreds of times.
    • Rounding boxes down instead of up.
    • Buying boxes from different batches on different days.
    • Subtracting furniture or cabinets that sit on top of the tile.

    Once the floor is planned, the paint calculator sizes the wall paint, so both materials arrive before the work starts.

    Further reading: the Tile Council of North America resource center covers tile installation, product quality and how to find qualified labour.

    FAQs

    A 10 by 10 foot room (100 sq ft) needs 108 tiles of 12 by 12 inches with 1/8 inch joints and 10% extra. Without the extra percentage, the count is 98 tiles.

    The count depends on tile size. A 12 by 12 inch tile gives 0.98 tiles per sq ft with a joint, a 6 by 6 inch tile gives 3.84, and a 4 by 4 inch tile gives 8.46.

    Yes, for straight layouts. Diagonal and herringbone patterns need 15%, and large tiles in small rooms may need more. Unopened spares cover later repairs.

    Multiply the length by the width in inches, then divide by 144. A 6 by 8 inch tile measures 48 square inches, which equals 0.33 sq ft.

    One 50 lb bag covers about 80 sq ft with a 1/4 by 3/8 inch notched trowel, which works out to 0.63 lb per sq ft. Larger tiles need a deeper notch.

    Smaller tiles have more joints per square foot. For 100 sq ft with 1/8 inch joints, 4 by 4 inch tiles need 21.5 lb of grout, and 12 by 12 inch tiles need 7.2 lb.

    Yes. Enter the wall width as the length and the wall height as the width, subtract niches and windows, and the result covers a shower wall or backsplash like a floor.

    A 300 by 300 mm tile with a 3 mm joint gives 10.9 tiles per m². A 600 by 600 mm tile gives 2.75 tiles per m². Add 10% on top of either figure.

    Scroll to Top