Lighting Calculator: How Many Lumens Does a Room Need?

This lighting calculator turns your room size into the lumens and bulbs you need. Pick the room, choose how bright you want it, and the result updates as you type.

Lighting Calculator

Room
How bright?
Bulbs
Light you need0 lm
Bulbs needed0
  • Room area0
  • Target brightness0
  • Allowance added0%
  • Range for this room0
  • Approx. LED power0

Targets follow common residential guidance in lumens per square foot (foot-candles). Different sources vary, so type your own target if you prefer. Allowances are rules of thumb. LED power assumes 90 lumens per watt.

Buying bulbs by watts used to work, because watts and brightness moved together. With LEDs, a 9 watt bulb can match an old 60 watt one, so the number that matters now is lumens. A lighting calculator turns your room size into the lumens you need and the number of bulbs to buy.

The lighting calculator above takes the room size, the room type and how bright you want it. It returns total lumens, the bulb count and a rough LED wattage. Every example below uses a 14 ft by 12 ft living room, which is 168 sq ft (15.6 m²), because that’s the room the tool loads by default.

What Is a Lighting Calculator and How Does It Work?

A lighting calculator multiplies the room’s floor area by the brightness that room needs, then divides by the lumens of one bulb to give the bulb count. It replaces guessing at the shop.

Brightness is measured in lumens per square foot, also called foot-candles, or in lux, which is lumens per square metre. One foot-candle equals 10.764 lux. In the default room, the living room target is 15 lumens per square foot, and 168 sq ft times 15 gives 2,520 lumens. At 800 lumens a bulb, that’s 3.15 bulbs, so you buy 4.

Lumens are the total light a bulb gives off. Lux is how much of it lands on a surface. The tool works in lumens because that’s the number printed on the bulb box.

How Do You Use This Lighting Calculator?

Enter the room length, width and ceiling height, pick the room or task and a brightness level, then choose the bulb you plan to buy. If you measure in metres, switch the toggle and the fields convert.

  1. Choose feet or metres at the top of the tool.
  2. Type the room length, width and ceiling height.
  3. Choose the room or task, such as living room or kitchen worktops.
  4. Set the brightness. Soft uses the low end of the range, Standard the middle and Bright the top.
  5. Pick the wall and ceiling colour, because dark rooms soak up more light.
  6. Choose the lumens on your bulb. A typical 60 watt equivalent LED is 800 lumens.

The result panel shows total lumens, the bulb count, the area, the target brightness, the allowance added, the range for the room and the approximate LED power. If you already have a target in mind, type it into the optional field. If you’re repainting at the same time, work out the paint first with the paint calculator, since wall colour changes how much light you need.

How Many Lumens Does a Room Need?

Most living rooms and bedrooms need 10 to 20 lumens per square foot, kitchens and bathrooms 20 to 50, and desks and worktops 50 to 100. The ranges below are the ones the tool uses.

Room or taskLumens per sq ftLuxExample total (middle of range)
Living room10 to 20108 to 21514 x 12 ft: 2,520 lm
Bedroom10 to 20108 to 21512 x 12 ft: 2,160 lm
Dining room10 to 20108 to 21510 x 12 ft: 1,800 lm
Kitchen, general20 to 50215 to 53810 x 12 ft: 4,200 lm
Kitchen worktops50 to 100538 to 1,07610 x 2 ft: 1,500 lm
Bathroom20 to 50215 to 5388 x 6 ft: 1,680 lm
Home office desk zone50 to 100538 to 1,0764 x 3 ft: 900 lm
Hallway5 to 1054 to 10812 x 3 ft: 270 lm

The examples use the middle of each range, and the room sizes are only samples. These ranges follow common residential guidance, which lighting retailers publish as Illuminating Engineering Society (IES) values. Other sources differ a little. A UK lighting guide gives sitting rooms and bedrooms 10 to 20 lumens per square foot, and the CIBSE figure for a bedroom is 150 lux, which is about 14 lumens per square foot.

Some retail guides quote 70 to 80 lumens per square foot for kitchens and bathrooms. That level suits worktops and mirrors better than the whole room, which is why the tool splits the kitchen into two settings. If your own source says something different, type its number into the optional target field.

How Do You Calculate Lumens by Hand?

Multiply the floor area by the lumens per square foot for the room, then add an allowance if the room is dark or the ceiling is high. The sum takes a minute.

Take the default living room. The floor area is 14 times 12, which is 168 sq ft. The target is 15 lumens per square foot, so the room needs 168 times 15, or 2,520 lumens. The range for the room is 1,680 lumens at the soft end and 3,360 at the bright end.

Metric works the same way with lux. A 4 m by 3.5 m room is 14 m². A target of 15 foot-candles is 161 lux, so the room needs 14 times 161.46, or about 2,260 lumens. At 800 lumens a bulb, that’s 3 bulbs.

How Many Bulbs Do You Need?

Divide the total lumens by the lumens on one bulb’s box and round up. The bulb count changes a lot with the bulb you pick.

Common outputs are 450 lumens for a 40 watt equivalent, 800 for a 60 watt, 1,100 for a 75 watt and 1,600 for a 100 watt. For the 2,520 lumens in the default room, that means 6 bulbs at 450 lumens, 4 at 800 lumens, or 2 at 1,600 lumens.

Power drops sharply with LEDs. Modern LEDs give roughly 70 to 110 lumens per watt, and the tool assumes 90. That makes 2,520 lumens about 28 watts. The same light from old 60 watt incandescent bulbs would draw around 190 watts. Spread the bulbs around the room, in several fixtures or lamps, rather than relying on one bright ceiling light, and you’ll get fewer shadows and less glare.

Do Wall Colour and Ceiling Height Change the Answer?

Yes, dark walls and high ceilings need more light, so add roughly 10 to 20% to the total. Light surfaces bounce more of the light back into the room.

The tool adds nothing for light walls, 10% for medium walls and 20% for dark walls. A ceiling above 9 ft (2.75 m) adds another 10%, and above 12 ft (3.65 m) adds 20%. These are rules of thumb, not measured values, so treat the result as a starting point.

Here’s how it plays out in the default room. Dark walls raise 2,520 lumens by 20% to 3,020 lumens, which is still 4 bulbs at 800 lumens. Add a 10 ft ceiling and the allowance becomes 30%, so the room needs 3,280 lumens and 5 bulbs. Lighter paint is the cheaper fix, so the room colour combination guide is worth a look before you buy more fixtures.

How Much Light Does a Kitchen Need?

A kitchen needs two targets, 20 to 50 lumens per square foot for the room and 50 to 100 on the worktops. Treat them as separate layers and add the totals.

For a 10 ft by 12 ft kitchen, the room is 120 sq ft. At the middle of the general range, 35 lumens per square foot, that’s 4,200 lumens, or 6 bulbs at 800 lumens. A worktop run of 10 ft by 2 ft is 20 sq ft. At 75 lumens per square foot, it needs 1,500 lumens, or 2 more bulbs of 800 lumens.

Together that’s 5,700 lumens. Put the worktop light under the wall cabinets, so your hands don’t cast a shadow on what you’re cutting. A ceiling light alone leaves the counter in your own shadow.

How Much Light Do a Living Room and Bedroom Need?

Aim for 10 to 20 lumens per square foot of soft, dimmable light, then add lamps for reading and for features you want to show off. These rooms work in layers, not from one source.

A 12 ft by 12 ft bedroom is 144 sq ft. At 15 lumens per square foot it needs 2,160 lumens, which is 3 bulbs at 800 lumens. A dimmer lets the same setup serve both a bright tidy-up and a calm evening.

Add task light on top of that. One UK lighting guide suggests a reading light should give at least 450 lumens, which is about one 40 watt equivalent bulb. The same guide says accent light on a picture or shelf should be around three times as strong as the room light falling on it.

How Do You Light a Home Office or Bathroom?

For a desk, light the work area at 50 to 100 lumens per square foot instead of the whole room, and in a bathroom put the light at the mirror. Task areas need far more light than the room around them.

A 4 ft by 3 ft desk zone is 12 sq ft, and at 75 lumens per square foot it needs 900 lumens, which one 1,100 lumen lamp covers. Lighting the whole 100 sq ft office to the same level would take 7,500 lumens, so a desk lamp with softer room light is the practical answer.

An 8 ft by 6 ft bathroom is 48 sq ft. At 35 lumens per square foot it needs 1,680 lumens, or 3 bulbs at 800 lumens. Place lights on both sides of the mirror, not only above it, so your face isn’t shadowed.

Which Colour Temperature and CRI Should You Choose?

Choose 2700 to 3000 K for living rooms and bedrooms, 3500 to 4000 K for kitchens, offices and bathrooms, and a CRI of 80 or higher. Kelvin sets the colour of the light, and lumens set the brightness.

Lower Kelvin numbers give a warm, yellow light, and higher numbers give a cooler, whiter one. The colour rendering index (CRI) shows how truthfully a bulb shows colour compared with daylight. A CRI of 80 to 90 is good for the home. Keep every bulb in one room at the same Kelvin, because mixed colours look uneven.

Which Mistakes Make a Lighting Plan Wrong?

The most common mistake is buying by watts, which no longer tells you how bright a bulb is. Check the lumens on the box.

  • Counting fixtures instead of lumens.
  • Using the whole-room target at a desk or worktop.
  • Forgetting the extra light that dark walls and tall ceilings need.
  • Relying on one bright ceiling light.
  • Mixing colour temperatures in the same room.
  • Skipping a dimmer, so the room is either too bright or too dark.

Daylight matters too. If you’re choosing window treatments, the curtain calculator shows how much fabric you need, and lighter curtains let more of the day in.

Further reading: the U.S. Department of Energy explains how to pick efficient bulbs in its guide to lighting choices that save you money.

FAQs

Most living rooms and bedrooms need 10 to 20 lumens per square foot. Kitchens and bathrooms need 20 to 50, and desks or worktops need 50 to 100.

Multiply the length by the width to get square feet, then multiply by the lumens per square foot for the room. A 168 sq ft living room at 15 needs 2,520 lumens.

A 60 watt incandescent bulb gives about 800 lumens. A modern LED with the same output uses roughly 9 watts. Always check the lumens printed on the box.

Lumens measure the total light a bulb gives off. Lux measures how much of it lands on a surface, as lumens per square metre. One foot-candle equals 10.764 lux.

A 12 by 12 ft bedroom is 144 sq ft. At 15 lumens per square foot it needs 2,160 lumens, which is 3 bulbs of 800 lumens each.

Yes. Dark walls absorb more light, so add about 10 to 20% to the total lumens. The calculator adds 10% for medium walls and 20% for dark walls.

Yes. Switch to metres and the tool uses square metres and lux. A target of 15 lumens per square foot becomes about 161 lux.

No. Too much light causes glare and wastes power. Aim for the range for the room, and fit a dimmer so you can turn it down in the evening.

Scroll to Top