Curtain Calculator: How Much Fabric Do You Need?

This curtain calculator turns your window size into the curtain panels or fabric you need, with fullness, length and hems built in. Enter the window width, choose the length style, and the result updates as you type.

Curtain Calculator

Window and rod
Length
What are you buying?
Advanced settings

The rod extends past the window so the curtains clear the glass when open. Hem allowances apply to made-to-measure fabric only.

Curtains to buy - Enter your window size

    Estimates only. Check the header style and fullness the manufacturer recommends before you order.

    Curtains are priced by the panel or by the yard, so a counting error shows up in the bill. Buy too few panels, and the curtains look flat and stretched across the window. Buy too much fabric, and the extra yards can’t be returned once the tailor cuts them. A curtain calculator fixes both problems by working from the rod width instead of the window width.

    The tool above takes the window and rod size, the fullness, the length style and the type of curtain you’re buying. It returns the panels or the fabric to order. Each US example below uses a 36 inch wide window with an 84 inch drop, and each metric example uses a 120 cm wide window with a 215 cm drop.

    What Is a Curtain Calculator and How Does It Work?

    A curtain calculator works out the curtain width from the rod length multiplied by the fullness, then converts that width into ready-made panels or yards of fabric. If the curtains are made to measure, the tool adds hems and pattern repeat to the length.

    The tool runs four steps. It finds the rod width, multiplies by the fullness, sets the finished length from the length style, and divides by the panel or fabric width. Take a 36 inch window. A rod 8 inches longer on each side measures 52 inches, and standard 2x fullness needs 104 inches of curtain. Two 54 inch panels supply 108 inches, so the answer is 2 panels.

    How Do You Use This Curtain Calculator?

    Enter the window width and the distance from the rod to the floor, pick the fullness and length style, and the curtain calculator shows the panels or fabric to buy. If you measure in centimetres, switch the toggle and the fields convert for you.

    1. Choose inches or centimetres at the top of the tool.
    2. Type the window width, or the rod width if the rod is already up.
    3. Pick a pair or a single curtain, and choose the fullness.
    4. Select the length style and type the rod-to-floor or rod-to-sill measurement.
    5. Choose ready-made panels or made-to-measure fabric.
    6. Type the panel width, or the fabric width and pattern repeat.

    The result panel lists the rod width, the curtain width needed, the finished length, the panels or widths of fabric, and the next standard length. Add a price to see the cost. Choose the curtain colour before you buy, with the room colour combination guide for ideas.

    How Do You Measure a Window for Curtains?

    Measure the window width, then add 8 to 10 inches (20 to 25 cm) on each side to find the rod width, and measure the drop from the rod or rings to the floor. If the rod is already fitted, measure the full rod instead, without the finials.

    A 36 inch window with an 8 inch extension per side needs a 52 inch (132 cm) rod. The extra width lets the curtains stack beside the glass instead of covering it, so the window lets in more light when the curtains are open.

    For the drop, measure from the bottom of the curtain ring if the curtain hangs from rings, or from the top of the rod for eyelet and rod pocket styles. Take the measurement at the left, middle and right of the window, because floors slope, and use the longest figure. If there’s no rod yet, mount the rod first, since the hardware sets the starting point for every number.

    How Wide Should Curtains Be?

    Curtains should be 2 to 3 times the rod width, so a 52 inch rod needs between 104 and 156 inches of curtain. If the curtain is narrower than 1.5 times the rod width, the fabric won’t fold into gathers and the window looks covered by a flat sheet.

    This number is the total width of all panels together, measured flat. For a pair, each side carries half of the total. A pair of 54 inch panels on a 52 inch rod gives 108 inches, which is 2.08 times the rod width.

    Many guides measure the window and multiply that number, which understates the width by the amount the rod extends. The 36 inch window multiplied by 2 gives 72 inches, and the correct figure is 104 inches, so the window version leaves the curtains about 30% too narrow.

    What Fullness Should You Choose?

    Choose 2x for standard curtains, 2.5x for a fuller look, and 3x for sheers and luxury pleats. If the fabric is thick or lined, a lower fullness can still look generous, because the weight forms deeper folds.

    The table shows what each fullness does to the 52 inch rod. The panel column uses 54 inch ready-made panels, and the fabric column uses 54 inch wide fabric with 3 inch side hems on each curtain.

    FullnessCurtain width neededReady-made panels (54 in wide)Fabric widths (54 in wide)
    1.5x (light)78 in (198 cm)22
    2x (standard)104 in (264 cm)23
    2.5x (full)130 in (330 cm)43
    3x (luxury)156 in (396 cm)43

    Panel counts jump in steps because panels come whole, and a pair must match. At 2.5x the width needed is 130 inches, which is 2.4 panels, so the tool rounds up to 3 and then to 4 so both sides carry the same number. The fabric column doesn’t need the even number, because the tailor can cut a width in half.

    What Length Should Curtains Be?

    Floor-length curtains end 0.5 inch (1.3 cm) above the floor, sill-length curtains end 0.5 inch above the sill, and apron curtains end 6 inches (15 cm) below the sill. If you want a puddle, add 3 inches (7.5 cm) to the floor measurement, and for a trouser break add 1 inch (2.5 cm).

    The 84 inch drop gives a floor-length curtain of 83.5 inches. A puddle style turns the same drop into 87 inches. An apron curtain on a window with a 54 inch rod-to-sill drop ends at 60 inches.

    Ready-made curtains come in standard lengths, which are commonly 63, 84, 96, 108 and 120 inches in the US and around 137, 183 and 229 cm in the UK. The tool shows the next standard length at or above your finished length. If your finished length is 83.5 inches, an 84 inch panel fits. If it’s 87 inches, you need the 96 inch panel and a hem, or a made-to-measure curtain.

    How Many Curtain Panels Do You Need?

    Divide the curtain width needed by the width of one panel, round up, and use an even number for a pair. The tool returns 2 panels for the 52 inch rod, and 4 panels for a 48 inch window.

    Take the 48 inch window. The rod is 64 inches, 2x fullness needs 128 inches, and 128 divided by 54 gives 2.4, which rounds up to 3 and then to 4. Four panels supply 216 inches, so the real fullness is 3.4x and the curtains look rich. A wider panel avoids the jump, so a pair of 84 inch wide panels covers the same rod at 2.6x.

    Metric panels follow the same rule. A 120 cm window with a 20 cm extension per side needs a 160 cm pole, and 2x fullness needs 320 cm. Two 168 cm panels supply 336 cm, which is 2.1x.

    Keep the panel width in mind when you shop. Panels labelled by pair state the width for both panels together, so check the label before you divide.

    How Much Fabric Do You Need for Curtains?

    Fabric needed equals the number of fabric widths multiplied by the cut length, where widths equal the curtain width plus side hems divided by the fabric width, rounded up. The cut length is the finished length plus 12 inches (30 cm) for the top and bottom hems.

    Work the 36 inch window by hand. The curtain width is 104 inches, and two curtains add 3 inches of side hem each, which makes 110 inches. A 54 inch wide fabric gives 2.04 widths, rounded up to 3. The cut length is 83.5 plus 12, or 95.5 inches, so 3 widths need 286.5 inches, which is 7.96 yards (7.3 m). Order 8 yards.

    Patterned fabric needs one more step. The cut length must be a multiple of the pattern repeat, so that every width starts at the same point of the design. With a 30 inch repeat, 95.5 inches rounds up to 120 inches, and 3 widths need 10 yards. The same pattern adds 2 yards to the order.

    In metric, 160 cm of pole at 2x gives 320 cm, and 15 cm of side hems brings it to 335 cm. Fabric 137 cm wide needs 3 widths. The cut length is 213.7 plus 30, or 243.7 cm, so the total is 7.3 m, and the order is 7.4 m. A 32 cm repeat raises the cut to 256 cm and the order to 7.7 m.

    Do Headings and Lining Change the Calculation?

    Yes, the heading style changes the fullness you need, and lining changes the weight and the order but not the width count. Eyelet and flat headings often work at 1.5 to 2x, pleated headings at 2 to 2.5x, and sheers at 2.5 to 3x.

    The heading also sets where the length starts. A rod pocket or eyelet curtain hangs from the rod itself, so measure from the top of the rod. A curtain on rings or hooks hangs from the ring, so measure from the bottom of the ring.

    Lining needs the same number of widths as the face fabric. Order it with the same width count, and ask the supplier for the lining length, because it’s cut a little shorter than the face fabric. Blackout and thermal linings also add weight, so check the rod’s load rating before you hang them.

    How Do You Estimate the Cost of Curtains?

    Multiply the panels by the price per panel, or the yards of fabric by the price per yard, and add lining, hardware and making charges separately. If the supplier charges per metre, use the metric option.

    In the US example, 2 ready-made panels at $40 each cost $80. In the made-to-measure example, 8 yards of fabric at $12 per yard cost $96 before the tailor’s charge. The 30 inch repeat raises the order to 10 yards, and the fabric cost to $120. Both prices are illustrations, so type your own into the tool.

    Compare the finished width, not the price. A cheaper panel that is 50 inches wide may need 4 panels where a 54 inch panel needs 2, and the extra panels cancel the saving.

    Which Mistakes Make a Curtain Estimate Wrong?

    The most common mistake is measuring the window instead of the rod, which leaves the curtains too narrow. The 36 inch window needs 104 inches of curtain, and the window-based figure gives only 72.

    • Skipping the fullness multiplier.
    • Rounding panels down instead of up.
    • Ordering an odd number of panels for a pair.
    • Forgetting hems and side allowances on made-to-measure fabric.
    • Ignoring the pattern repeat.
    • Measuring the length before the rod is fitted.

    If you’re hanging wallpaper behind the curtains, calculate it first. The wallpaper calculator sizes the rolls, and the bedroom colour combination guide helps match the curtain colour to the walls.

    Further reading: the U.S. Department of Energy explains how window coverings affect heat loss and gain in its guide to residential windows and window coverings (PDF).

    FAQs

    Curtains for a 36 inch window need about 104 inches of total width on a 52 inch rod at 2x fullness. Two 54 inch panels provide 108 inches.

    Make the rod 8 to 10 inches (20 to 25 cm) wider than the window on each side. This lets the curtains stack beside the glass, so the window stays clear.

    Choose 2x for standard curtains, 2.5x for a fuller look and 3x for sheers. Pleated headings need more fullness than flat or eyelet headings.

    Floor-length curtains end 0.5 inch above the floor. Sill-length curtains end 0.5 inch above the sill, and apron curtains end 6 inches below it.

    Multiply the fabric widths by the cut length. Widths equal the curtain width plus side hems divided by fabric width, and cut length is the finished length plus 12 inches.

    Round the cut length up to a multiple of the pattern repeat. A 95.5 inch cut with a 30 inch repeat becomes 120 inches, so the order rises from 8 to 10 yards.

    Yes, for a pair. Each side of the window needs the same number of panels, so the tool rounds an odd count up to the next even number.

    They can, but hovering 0.5 inch above the floor is the most common style. A trouser break adds 1 inch, and a puddle adds 3 inches or more.

    Scroll to Top