Paint Calculator: How Much Paint Do You Need?
This paint calculator turns your room size into the gallons or litres you need to buy. Enter the length, width and wall height, pick feet or metres, and the result updates as you type.
Paint Calculator
Advanced settings
Check the coverage printed on your tin. Smooth walls reach the higher figure, and rough or bare surfaces use more paint.
Estimates only. Round up, buy all tins of one colour together, and check the label of your paint.
Guessing paint quantities costs money in both directions. Buy too little, and a second batch of the same colour can look slightly different on the wall. Overbuying leaves a half-full gallon in the garage for years.
A paint calculator replaces the guess with measurements. This guide explains how the tool above works, how to measure each surface, and why coverage figures differ between US gallons and UK litres. Every example uses a 12 by 12 foot (3.7 by 3.7 metre) room with 8 foot (2.4 metre) walls.
What Is a Paint Calculator and How Does It Work?
A paint calculator estimates paint quantity by converting room measurements into a paintable wall area, then dividing that area by the coverage of one gallon or one litre. If a room has doors or windows, the calculator subtracts their area first, because paint never reaches those openings.
The same five steps apply to any room. Measure the wall perimeter, multiply by the wall height, subtract the openings, multiply by the number of coats, and divide by the coverage on the tin.
Take the example room. Its walls measure 384 square feet (sq ft), or 35.7 square metres (m²), before openings. One door (20 sq ft) and one window (15 sq ft) leave 349 sq ft (32.4 m²). Two coats double that to 698 sq ft, and a gallon covering 350 sq ft gives 1.99 gallons. Ten percent extra for spills raises the total to 2.19 gallons, which is 8.3 litres.
How Do You Use This Paint Calculator?
Enter the room length, width and wall height, choose feet or metres, and the paint calculator returns the amount of paint in both gallons and litres. If you’re painting several rooms with the same dimensions, set the identical rooms field to that number.
- Choose feet and gallons or metres and litres at the top of the tool.
- Type the room length, width and wall height.
- Enter the number of doors and windows to leave out.
- Select the number of wall coats, usually two.
- Tick the ceiling and primer boxes for any surface you’re painting.
- Open advanced settings to match the coverage printed on your tin.
The result panel lists the wall area, the total area including coats, and a suggested set of tins. A 4 by 4 metre room with 2.4 metre walls, for instance, needs 6.5 litres, which the tool turns into one 5 litre tin and two 1 litre tins.
Pick the colour before you calculate, because dark shades change the coat count. Our room colour combination guide and the bedroom colour combination guide list tested pairings with paint names.
How Do You Measure a Room for Paint?
Measure the floor length and width along the skirting boards (baseboards in the US), then measure the wall height from floor to ceiling. If the walls differ in height, as they do under a staircase or a sloped ceiling, measure each wall separately and add the areas.
Measuring Walls
Wall area equals the room perimeter multiplied by the wall height. If the room isn’t a plain rectangle, walk the walls with a tape measure, add up the perimeter, and enter a length and width that add up to half of it.
An L-shaped room with a 56 foot (17 metre) perimeter, for example, works with a length of 14 feet and a width of 14 feet, because 14 plus 14 is half of 56.
Measuring Ceilings
Ceiling area equals the room length multiplied by the room width. If the ceiling is textured or you’re changing its colour, plan for more than one coat.
The example room has a 144 sq ft (13.4 m²) ceiling. At one coat and 350 sq ft per gallon, it adds 0.45 gallons once the 10 percent allowance is included.
Measuring Doors and Windows
Subtract about 20 sq ft (1.9 m²) for each standard door and 15 sq ft (1.4 m²) for each window. If your openings differ from these defaults, change the sizes in the advanced settings.
A standard UK internal door measures 1981 by 762 millimetres, which is 1.5 m² (16 sq ft), so the metric default of 1.6 m² rounds up slightly. Larger sliding doors and bay windows deserve their own measurements.
How Much Paint Does One Gallon or Litre Cover?
One US gallon covers about 350 to 400 sq ft (32 to 37 m²) per coat, and a UK emulsion tin can state coverage of up to 13 m² per litre (140 sq ft). If your tin shows a different figure, type it into the coverage field, because the label describes that specific product.
Both numbers are manufacturer estimates. Sherwin-Williams advises buying a little more than the minimum when walls are textured, and Dulux bases its guidance on the product’s stated coverage and number of coats.
Converted to metric, 350 sq ft per US gallon equals 8.6 m² per litre. That gap explains why the same room gives different volumes in the two systems. The example room needs 64.8 m² of coverage for two coats, which is 5 litres at 13 m² per litre and 7.5 litres at 8.6 m² per litre.
Paint Quantity by Room Size
A 12 by 12 foot (3.7 by 3.7 metre) bedroom with 8 foot (2.4 metre) walls needs about 2 gallons, or 5.4 litres at UK coverage, for two coats of wall paint. If a room has extra windows or doors, subtract their area before you compare it with this table.
The table assumes one door, one window, no ceiling and no extra allowance.
| Room size | Net wall area | US paint (350 sq ft per gallon) | UK paint (12 m² per litre) |
|---|---|---|---|
| 8 x 8 ft (2.4 x 2.4 m) | 221 sq ft (20.5 m²) | 1.26 gal (4.8 L) | 3.4 L (0.90 gal) |
| 10 x 10 ft (3.0 x 3.0 m) | 285 sq ft (26.5 m²) | 1.63 gal (6.2 L) | 4.4 L (1.17 gal) |
| 12 x 12 ft (3.7 x 3.7 m) | 349 sq ft (32.4 m²) | 1.99 gal (7.5 L) | 5.4 L (1.43 gal) |
| 12 x 14 ft (3.7 x 4.3 m) | 381 sq ft (35.4 m²) | 2.18 gal (8.2 L) | 5.9 L (1.56 gal) |
| 14 x 16 ft (4.3 x 4.9 m) | 445 sq ft (41.3 m²) | 2.54 gal (9.6 L) | 6.9 L (1.82 gal) |
| 16 x 20 ft (4.9 x 6.1 m) | 541 sq ft (50.3 m²) | 3.09 gal (11.7 L) | 8.4 L (2.21 gal) |
Add 10 percent to each figure for spills and touch-ups. A 14 by 16 foot room, for example, goes from 2.54 gallons to 2.80 gallons once the allowance is included.
How Many Coats of Paint Do You Need?
Two coats is the standard for walls, and ceilings usually need one coat. If you’re covering a dark colour with a light one, plan for a third coat.
Painting a Light Colour Over a Dark One
A light colour over a dark wall needs three coats in many cases, or a coat of primer followed by two coats of colour. If the old colour is a deep navy or red, test a small patch before you buy the full quantity.
Three coats in the example room raise the total from 2.19 gallons to 3.29 gallons (12.5 litres).
Using Primer
One gallon of primer covers 200 to 300 sq ft (19 to 28 m²), so primer spreads over less area than most finish paint. If the walls are new plaster or drywall, apply primer before the colour.
For the example room, 349 sq ft at 250 sq ft per gallon needs 1.4 gallons, or 1.54 gallons with the 10 percent allowance. The calculator uses 250 sq ft per gallon (10 m² per litre) for primer unless you change it.
Does Surface Type Change How Much Paint You Need?
Rough, porous and textured surfaces absorb more paint than smooth walls, so they need a bigger allowance. If you’re painting bare plaster, brick or textured wallpaper, raise the extra from 10 percent to 20 percent.
A 20 percent allowance on the example room gives 2.39 gallons (9.1 litres) instead of 2.19 gallons. Application method matters too. Sprayers lose more paint to overspray than rollers do, so check the sprayer manual before you order.
How Much Paint Do You Need for Trim, Doors and Skirting Boards?
Woodwork for one small room, such as a door and its skirting boards, takes about 750 millilitres (0.2 US gallon) of paint. If window frames and a picture rail need paint too, buy a 1 litre (1 US quart) tin.
Dulux lists 1 litre for a 2.5 metre feature wall and 2.5 litres for a small room as quick in-store guides. Kitchen cabinets need a different estimate, because the doors and drawer fronts add area on both sides. Our kitchen cabinet ideas guide puts DIY materials for painting existing cabinets at $200 to $600.
How Do You Convert Between US Gallons, Imperial Gallons and Litres?
One US gallon equals 3.785 litres, and one imperial gallon equals 4.546 litres. If an older UK label or a trade quote mentions gallons, check which gallon it means before you order.
The 2.19 US gallon result for the example room equals 8.3 litres, or 1.8 imperial gallons. UK paint is sold in 1, 2.5 and 5 litre tins, whereas US paint comes in 1 quart (0.95 litre) cans, 1 gallon cans and 5 gallon buckets. A quick conversion helps whenever you follow a US tutorial from the UK.
Which Mistakes Make a Paint Estimate Wrong?
The most common mistakes are forgetting the second coat, mixing feet with metres, and rounding down to the nearest tin. If a result lands just above a tin size, buy the next size up, because a second batch of the same colour can differ slightly.
- Forgetting the second coat, which halves the real coverage.
- Mixing units, such as a length in feet and a height in metres.
- Deducting too much, such as taking off a whole wall for a large window.
- Ignoring the ceiling, which adds 144 sq ft in the example room.
- Buying tins of one colour from different batches.
Pour tins of the same colour into one bucket and stir before painting, so small batch differences blend out.
How Do You Estimate Paint Cost?
Multiply the volume of paint you buy by the price per gallon or litre. If the tool suggests several tin sizes, price each size separately, since larger tins usually cost less per litre.
For example, two 1-gallon cans plus one 1-quart can come to 2.25 gallons. At $45 per gallon, that is $101.25. Enter a price in advanced settings and the calculator does this sum for you.
Further reading: if your home was built before 1978, the U.S. Environmental Protection Agency explains how to reduce the risk of lead exposure at home before you sand or scrape old paint.
FAQs
A 12 by 12 foot room with 8 foot walls needs about 2 gallons for two coats, or 2.19 gallons with a 10 percent allowance. That equals roughly 8.3 litres.
One gallon covers about 350 to 400 sq ft (32 to 37 m²) per coat. Textured or porous surfaces use more paint, so check the figure on your tin.
Divide the net wall area in square metres by the coverage per litre, then multiply by the coats. A 4 by 4 metre room with 2.4 metre walls needs about 6.5 litres for two coats.
Yes. Subtract about 20 sq ft (1.9 m²) per door and 15 sq ft (1.4 m²) per window. Skipping this step adds roughly 0.2 gallon (0.75 litre) of paint per room.
Yes, if you’re painting bare plaster, new drywall or a stained surface. One gallon of primer covers 200 to 300 sq ft (19 to 28 m²).
Two coats is standard. Ceilings usually need one, and a light colour over a dark one can need a third coat.
Add 10 percent for spills and touch-ups, or 20 percent for rough surfaces. Round up to the next tin size so you finish with one batch.
No. A US gallon is 3.785 litres and an imperial gallon is 4.546 litres. UK paint is sold in litres, so convert before you order.